Quality certification standard for reliability testing electronic products

Date：2022-08-22 18:32:09 Views：1482

What are the reliability test standards for electronic products? The number of electronic products is constantly increasing, and the quality of products will be affected by different factors in the production process. The reliability test standard is to understand whether the normal use of products will be affected by different climatic and mechanical environments encountered by electronic products in the production and application process. Through the reliability test, the reliability characteristic quantity of electronic products when they are working or stored under various environmental conditions can be determined to provide useful data for use, production and design; It can also expose the problems existing in the design, raw materials and process flow of the product.

The reliability test standards of electronic products are as follows:

High temperature test (GB / T 2423.2, IEC 60068-2-2, eia-364-17)

Low temperature test (GB / T 2423.1, IEC 60068-2-1, eia-364-59)

Rapid temperature change test (GB / T 2423.22, iec60068-2-14)

Thermal shock test (GB / T 2423.22, iec60068-2-14, eia-364-32)

Constant temperature and humidity test (GB / T 2423.3, IEC 60068-2-78, mil-st-202)

Temperature change test (GB / T 2423.22, iec60068-2-14)

Alternating damp heat (GB / T 2423.4, IEC 60068-2-30)

Temperature and humidity combined cycle test (GB / T 2423.34, iec60068-2-38, mil-st-202)

Salt spray test (GB / T 2423.17, IEC 60068-2-11, GB / T 10125)

IP level test (IEC 60529, GB / T 4208, IEC 60598)

UV Test ISO 4892.3 GB / T 16422.3 ASTM g 154

Xenon lamp test ISO 4892.2 GB / T 16422.2 ASTM g 155

Gas corrosion test eia-364-65 GB / T 2423.51 IEC 60068-2-60

Low pressure test (GB / T 2423.21, IEC 60068-2-13)

Ozone aging test (GB / T 7762, ISO 1431-1)

High pressure cooking test jes22-a102-c jes22-a110b jes22-a118

Vibration test GB / T 2423.56 IEC 60068-2-64 ASTM 4728

Impact test GB / t2423.5 iec60068-2-27 eia-364-27

Impact test (IEC 60068-2-27, GB / T 2423.6, GB / T 4857.20)

Drop test (GB / T 2423.8, ISO 2248, GB / T 4857.5)

RCA paper tape Friction Test ASTM F 2357

Friction test of alcohol, rubber and pencil GB / T 6739 ASTM 3363

Contact resistance test eia-364-23 eia-364-06 mil-st-202

Insulation resistance test eia-364-21 mil-st-202

Withstand voltage test eia-364-20 mil-st-202

Cross cut Test ASTM 3359

Plugging force test eia-364-13

Durability test eia-364-09

Wire swing test eia-364-41

Reliability has been listed as an important quality index of products to be examined and tested. For a long time, people only use the technical performance indicators of products as a sign to measure the quality of electronic components. This only reflects one aspect of the quality of products, and cannot reflect the overall picture of product quality. Because if the product is not reliable, even if its technical performance is good, it will not be able to play. In a sense, reliability can comprehensively reflect the quality of products.