Super full summary! List of standards for reliability test of military and civil products - Shenzhen Chuangxin Online Testing Technology Co., Ltd.

HOME >>

News >>

Super full summary! List of standards for reliability test of military and civil products

Date：2021-07-21 14:23:00 Views：2503

Reliability test can generally be divided into engineering test and statistical test. The purpose of engineering test is to expose the defects, weak links and faults of products in design, process, components and raw materials, so as to provide information for improving product reliability. The purpose of statistical test is to verify whether the product meets the specified reliability or service life requirements. The following is a list of common military and civilian product reliability test standards, hoping to help you.

The purpose, applicable object and applicable time of each test are shown in the table below:

Test type	Test purpose	Applicable object	Applicable time
Environmental stress screening (ESS)	Find and eliminate early faults caused by defects introduced by poor components, manufacturing process and other reasons.	It is mainly applicable to electronic products, as well as electrical, electromechanical, photoelectric and electrochemical products.	Product development stage and production stage.
Reliability development test (RDT)	By applying appropriate environmental stress and working load to the product, we can find the design defects in the product, so as to improve the design and improve the inherent reliability level of the product.	It is applicable to electronic, electrical, electromechanical, photoelectric and electrochemical products and mechanical products.	The early and middle stages of product development.
Reliability growth test (RGT)	By applying the comprehensive environmental stress simulating the actual environment to the product, expose the potential defects in the product and take corrective measures to make the reliability of the product meet the specified requirements.	It is applicable to electronic, electrical, electromechanical, photoelectric and electrochemical products and mechanical products.	In the middle of the product R & D stage, most of the technical status of the product has been determined.
Reliability qualification test (rqt)	Verify whether the developed products meet the specified reliability requirements.	It is mainly applicable to electronic, electrical, electromechanical, photoelectric and electrochemical products and molding products.	Product design confirmation is the design finalization stage, and the product is carried out after passing the environmental stress screening and environmental qualification test.
Reliability acceptance test (rat)	Verify whether the mass-produced products meet the specified reliability requirements.	It is mainly applicable to electronic, electrical, electromechanical, photoelectric and electrochemical products and molding products.	Product batch production stage.
Life test (LT)	Determine the service life or storage life of the product under specified conditions.	It is applicable to all kinds of products with service life and storage life requirements.	Product design finalization stage.

The former General Administration of quality supervision, inspection and Quarantine of the people's Republic of China and the National Standardization Administration of China

GB / T 35218-2017 tractor reliability bench test method
GB / T 17215.9311-2017 credibility of electrical measuring equipment Part 311: accelerated reliability test of temperature and humidity
GB / T 34554-2017 reliability test method for bonding structure of building glass curtain wall
GB / T 34434-2017 accelerated test method for reliability of household and similar electrical appliances
GB / T 33768-2017 reliability test method for optoelectronic devices for communication
GB / T 33721-2017 reliability test method for LED lamps
GB / T 33436-2016 test method for reliability and durability of four wheeled all terrain vehicles

AQSIQ, standards on reliability test

GB / T 29307-2012 reliability test method of drive motor system for electric vehicle
GB / T 5080.2-2012 reliability test Part 2: test cycle design
GB / T 5080.1-2012 reliability test Part 1: test conditions and statistical inspection principles
GB / T 24985-2010 reliability test method for household and similar room air conditioners
GB / T 24607-2009 rolling bearings Life and reliability test and evaluation
GB / T 24262-2009 environmental test and reliability requirements for petroleum geophysical instruments
GB / T 22758-2008 reliability test method for household electric washing machines
GB / T 22759-2008 reliability test method for household and similar refrigeration appliances
GB / T 5374-2008 reliability test method for motorcycles and mopeds
GB / T 15214-2008 reliability test requirements and methods for ultrasonic diagnostic equipment
GB / Z 22201-2008 reliability test method for contactor relay
GB / Z 22204-2008 reliability test method of overload relay
GB / Z 22203-2008 reliability test method of overcurrent protection circuit breakers for household and similar places
GB / Z 22202-2008 reliability test method for residual current operated circuit breakers for household and similar purposes
GB / Z 22200-2008 reliability test method for small capacity AC contactors
GB / Z 22074-2008 reliability test method for plastic case circuit breakers
GB / T 15510-2008 general rules for reliability test of electromagnetic relays for control
GB / T 21975-2008 reliability test method of three-phase asynchronous motor for hoisting and metallurgy
GB / T 19055-2003 reliability test method of automobile engine
GB / T 17806-1999 reliability test method for tower crane
GB / T 12165-1998 reliability requirements and test methods for cassette tape recorders
GB / T 12840-1996 reliability requirements and test methods for tape transport mechanism of cassette tape recorder
GB / T 5080.6-1996 effectiveness test of constant failure rate hypothesis in equipment reliability test
GB / T 16278-1996 reliability test method for graders
GB / T 15844.3-1995 reliability requirements and test methods for FM radiotelephones for mobile communications
GB / T 5374-1995 reliability test method for motorcycles and mopeds
GB / T 15524-1995 reliability requirements and test methods for non broadcast video tape recorders
GB / T 15510-1995 general rules for reliability test of electromagnetic relays for control
GB / T 15214-1994 requirements and methods for reliability test of Medical B-Mode Ultrasonic diagnostic equipment
GB / T 14127-1993 Bayes method for reliability verification test of black and white television receiver
GB / T 13751-1992 reliability test method for backhoe loaders
GB / T 13426-1992 reliability requirements and test methods for digital communication equipment
GB / T 12678-1990 reliability driving test method of automobile
GB / T 12322-1990 reliability test method for general application television equipment
GB / T 10675-1989 reliability test method for hydraulic excavators
GB / T 11463-1989 reliability test of electronic measuring instruments
GB / T 9382-1988 Bayes test method for reliability verification of color television broadcasting receivers
GB / T 8508-1987 reliability test method for tyre roller
GB / T 8422-1987 reliability test method for vibratory roller
GB / T 7288.1-1987 recommended test conditions for equipment reliability test rough simulation of indoor portable equipment
GB / T 7288.2-1987 recommended test conditions for equipment reliability test fine simulation of equipment used in places with climate protection
GB / T 5080.7-1986 verification test scheme of failure rate and mean time between failures under the assumption of constant failure rate in equipment reliability test
GB / T 5080.1-1986 General requirements for equipment reliability test
GB / T 5080.2-1986 guide for design of equipment reliability test cycle
GB 5374-1985 test method for reliability and durability of motorcycles
GB / T 5080.4-1985 equipment reliability test point estimation and interval estimation method for reliability determination test (exponential distribution)
GB / T 5080.5-1985 verification test scheme for success rate of equipment reliability test
GB / Z 22201-2016 reliability test method for contactor relay
GB / Z 22202-2016 reliability test method for residual current operated circuit breakers for household and similar purposes
GB / Z 22203-2016 reliability test method of overcurrent protection circuit breakers for household and similar places
GB / Z 22204-2016 reliability test method for overload relay
GB / T 28878.7-2016 specification for rotating parts of space science experiment part 7: reliability test
GB / Z 22074-2016 reliability test method for plastic case circuit breakers
GB / Z 22200-2016 reliability test method for small capacity AC contactors

Industry standard - light industry, standard on reliability test

QB / T 4987-2016 technical requirements and test methods for reliability of refrigerator compressor
QB / T 4142-2010 reliability test and evaluation methods for household and similar electrical appliances special requirements for electric water heaters
International Organization for standardization, standard on reliability test
ISO / TR 19247-2016 photography Guide for reliability testing of still life digital cameras
ISO 19973-5:2015 pneumatic hydraulics Evaluate the reliability of components through tests Part 5: non return valve, shuttle valve, double pressure valve (and function), one-way adjustable flow control valve and quick exhaust valve
ISO 19973-4:2014 pneumatic hydraulics Evaluate the reliability of components through tests Part 4: pressure regulators

Standard for reliability test

UNE 20-608 Pt. 1-1986 reliability testing of equipment - General requirements
UNE 20-608 Pt. 5-1985 reliability test of equipment - Compliance test plan for success rate

Industry standard - machinery, standard on reliability test

JB / T 12461-2015 crawler bulldozer Reliability test method, failure classification and evaluation
JB / T 12462-2015 tire loader Accelerated reliability test specification
JB / T 12463-2015 tire loader Reliability test method, failure classification and evaluation
JB / T 12151-2015 reliability requirements and test methods for electrostatic copiers
JB / T 12152-2015 reliability requirements and test methods for small offset presses for office machinery
JB / T 12021.2-2014 reliability test and evaluation of intelligent instruments Part 2: reliability test and evaluation of Intelligent Vortex Flowmeter
JB / T 10408-2014 reliability test method for heat exchanger of internal combustion engine
JB / T 11853-2014 reliability requirements and test methods for transmission projectors
JB / T 12021.1-2014 reliability test and evaluation of intelligent instruments Part 1: General guidelines
JB / T 12021.4-2014 reliability test and evaluation of intelligent instruments Part 4: reliability test and evaluation of intelligent temperature transmitters
JB / T 12021.3-2014 reliability test and evaluation of intelligent instruments Part 3: reliability test and evaluation of intelligent pressure transmitters
JB / T 11682-2013 reliability test method for automatic transfer switching apparatus (ATSE)
JB / T 4030.1-2013 test code for truck crane and tire crane Part 1: operation reliability test
JB / T 4030.2-2013 test code for truck crane and tire crane Part 2: driving reliability test
JB / T 11319-2013 reliability test method for load shifting transmission device of agricultural and forestry tractors and machinery
JB / T 11415-2013 reliability assessment method, bench test method, fault classification and judgment rules of split fuel injection pump assembly
JB / T 11414-2013 reliability assessment method, bench test method, fault classification and judgment rules of synthetic fuel injection pump assembly
JB / T 11416-2013 reliability assessment method, test method, fault classification and judgment rules of fuel injector assembly
JB / T 5135.3-2013 general purpose small gasoline engine part 3: reliability and durability test and evaluation method
JB / T 11222-2011 low speed vehicle Reliability test method for leaf spring
JB / T 11220-2011 low speed truck Reliability test method for front axle
JB / T 11221-2011 low speed vehicle Reliability test method for transmission shaft assembly
JB / T 6287-2008 grain combine harvester Reliability evaluation test method
JB / T 10914-2008 desander Reliability test method
JB / T 10762-2007 reliability test method for hydraulic torque converter
JB / T 10711-2007 reliability test method for plastic case circuit breaker
JB / T 10712-2007 reliability test method for overload relay
JB / T 6559.2-2006 reliability test specification for EDM machine tools Part 2: numerical control system
JB / T 6559.1-2006 reliability test code for EDM machine tools Part 1: pulse power supply
JB / T 6881-2006 pump reliability test
JB / T 6882-2006 pump reliability verification test
JB / T 10522-2005 reliability test method for small capacity AC contactors
JB / T 10493-2005 reliability test method for overcurrent protection circuit breakers for household and similar purposes
JB / T 10494-2005 reliability test method for residual current operated circuit breakers for household and similar purposes
JB / T 10408-2004 reliability test method for heat exchanger of internal combustion engine
JB / T 56015-2002 reliability index and test method of electromagnetic intermediate relay
JB / T 5135.2-2001 general purpose small gasoline engine Reliability and durability test and evaluation method
JB / T 4030.2-2000 test code for truck crane and tire crane Driving reliability test
JB / T 50013-2000 rolling bearing Life and reliability test procedure (internal use)
JB / T 4030.1-2000 test code for truck crane and tire crane Operation reliability test
JB / T 51181-2000 reliability assessment of outlet valve couple of fuel injection pump Evaluation method, bench test method and failure judgment (internal use)
JB / T 51184-2000 reliability assessment of fuel injection nozzle coupling Evaluation method, test method and failure judgment (internal use)
JB / T 51183-2000 reliability assessment of fuel injector assembly Evaluation method, test method, fault classification and judgment rules (internal use)
JB / T 51182-2000 reliability assessment of plunger coupling of fuel injection pump Evaluation method, bench test method and failure judgment (internal use)
JB / T 51180-2000 reliability assessment of split fuel injection pump assembly Evaluation method, bench test method, fault classification and judgment rules (internal use)
JB / T 51179-2000 reliability assessment of piston oil transfer pump assembly Evaluation method, bench test method, fault classification and judgment rules (internal use)
JB / T 51178-2000 reliability assessment of synthetic fuel injection pump assembly Evaluation method, bench test method, fault classification and judgment rules (internal use)
JB / T 50063-2000 diesel engine fuel injection pump Reliability evaluation method, test method, fault classification and judgment rules of automatic oil supply angle advancer assembly (internal use)
JB / T 50188-1999 diesel engine for construction machinery Reliability and durability test method (internal use)
JB / T 51018-1999 thresher Reliability evaluation test method (internal use)
JB / T 50039-1999 reliability requirements and test methods for small offset presses for office machinery
JB / T 50037-1999 reliability requirements and test methods for electrostatic copiers
JB / T 54401-1999 intermittent sand mixer Reliability test method (internal use)
JB / T 50191-1999 operation reliability requirements and test methods of machine tool electrical appliances (internal use)
JB / T 50118-1998 reliability test method for shot blasting equipment (internal use)
JB / T 50119-1998 reliability test method for hot chamber and horizontal cold chamber die casting machines (internal use)
JB / T 50117-1998 desander Reliability test method (internal use)
JB / T 50103-1998 general purpose bridge crane Reliability assessment test specification
JB / T 50109-1998 front axle of four-wheel agricultural transport vehicle Reliability assessment test specification (internal use)
JB / T 50110-1998 transmission shaft assembly of four-wheel agricultural transport vehicle Reliability assessment test specification (internal use)
JB / T 50106-1998 leaf spring of four-wheel agricultural transport vehicle Reliability assessment test specification (internal use)
JB / T 50091-1997 tire bulldozer Reliability test method (internal use)
JB / T 50093-1997 rolling bearing Life and reliability test evaluation method (internal use)
JB / T 7559-1994 general rules for reliability development test of mechanical products
JB / T 6882-1993 pump reliability verification test
JB / T 6881-1993 pump reliability test
JB / T 6871-1993 reliability test method for hydraulic universal testing machine
JB / T 6560-1993 numerical control system of EDM machine tool Reliability test specification
JB / T 6559-1993 pulse power supply for EDM machine tools Reliability test specification
JB / T 6287-1992 grain combine harvester Reliability evaluation test method
JB / T 6214-1992 guide for reliability verification test and measurement test (exponential distribution) of instruments and meters
JB / T 5929-1991 construction machinery drive axle Reliability test method
JB / T 5464-1991 technical requirements and test methods for reliability of electronic magnetic measuring instruments
JB / T 54308-1994 reliability requirements and test methods for AC contactors
JB / T 12034-2015 reliability assessment method, test method and failure judgment of fuel injection nozzle coupling
JB / T 51148-1994 reliability test method, fault classification and evaluation of wheel loaders
JB / T 51007-1992 reliability test method, fault classification and evaluation of Crawler Bulldozer
JB / T 51147-1994 accelerated reliability test specification for wheel loaders
JB / T 11558-2013 reliability test method for clay sand mixer
JB / T 11557-2013 reliability test method for hot chamber and horizontal cold chamber die casting machines
JB / T 12033-2015 reliability assessment method, bench test method and failure judgment of fuel injection pump plunger coupling
JB / T 12032-2015 reliability assessment method, bench test method and failure judgment of fuel injection pump outlet valve coupling
JB / T 12031-2015 reliability assessment method, bench test method, fault classification and judgment rules of piston oil transfer pump assembly
JB / T 12030-2015 reliability evaluation method, test method, fault classification and judgment rules of automatic advance device assembly for fuel supply angle of diesel engine fuel injection pump
JB / T 11556-2013 reliability test method for shot blasting equipment
JB / T 6214-2014 guide for reliability verification test and measurement test (exponential distribution) of instruments and meters
JB / T 56105-1999 reliability test method of three-phase asynchronous motor for hoisting and metallurgy

British Standards Institute, standard for reliability testing

BS ISO 19973-5:2015 pneumatic fluid power Evaluate the reliability of components through tests Non return valve, shuttle valve, double pressure valve (and function), one-way adjustable flow control valve and quick exhaust valve
BS ISO 19973-4:2014 pneumatic hydraulics Evaluate the reliability of components through tests Pressure regulator
BS EN 61124-2012 reliability testing Compliance test of constant failure rate and constant failure strength
BS EN 62660-2-2011 secondary lithium ion batteries for electric road vehicle propulsion Reliability and abuse test
BS IEC 60605-6:2007 equipment reliability tests Test for effectiveness and estimation of constant failure rate and constant failure intensity
BS EN 61747-5-3:2010 liquid crystal displays Test methods for environmental, resistance and mechanical properties Glass strength and reliability
BS EN 61124-2006 reliability test Compliance test of constant failure rate and constant failure strength
BS EN 60749-30:2005 + a1:2011 semiconductor devices Test methods for mechanical and climatic resistance Pretreatment before reliability test of non closed surface mounted equipment
BS EN 60749-30:2005 semiconductor devices Mechanical and climatic test methods Part 30: pre commissioning of non hermetic surface mount devices prior to reliability testing
BS EN 62309-2004 reliability of products containing reusable parts Functional and test requirements
BS EN 61164-2004 reliability growth Statistical test and estimation methods
BS EN 62315-1-2003 reliability of products containing reusable parts Functional and test requirements
BS EN 62005-2-2001 reliability of fibre optic interconnecting devices and passive optical elements Quantitative evaluation of reliability based on accelerated aging test Temperature, humidity and steady state
BS EN 62005-3-2001 reliability of fibre optic interconnecting devices and passive optical elements Passive component failure mode and failure mechanism evaluation test
BS IEC 60300-3-5:2001 reliability management Application guide Reliability test conditions and statistical test principles
DD ENV 50219-1996 reliability test structure description of European micro test chip
BS 5760-13.5-1996 reliability of systems, equipment and components Part 13: Guide to reliability test conditions for consumables Section 5: ground mobile equipment Low level simulation
BS 5760-10.2-1995 reliability of systems, equipment and components Guide for reliability testing Test cycle design
BS 5760-13.4-1993 reliability of systems, equipment and components Part 13: Guide to reliability test conditions for consumables Section 4: low level simulation conditions for portable and non fixed working equipment
BS 5760-13.1-1993 reliability of systems, equipment and components Part 13: Guide to reliability test conditions for consumables Section 1: low level simulation conditions for indoor mobile equipment
BS 5760-13.2-1993 reliability of systems, equipment and components Part 13: Guide to reliability test conditions for consumables Section 2: height simulation conditions of fixed working equipment in local climate protection places
BS 5760-13.3-1993 reliability of systems, equipment and components Part 13: Guide to reliability test conditions for consumables Section 3: low degree simulation conditions for fixed working equipment in local climate protection places
BS 5760 Sec. 10.5-1993 reliability of systems, equipment and components Part 10: guidelines for reliability testing Section 5: qualification test chart of success ratio
BS 5760-10.5-1993 reliability of systems, equipment and components Part 10: guidelines for reliability testing Section 5: success rate qualification test scheme
BS 5760-10.3-1993 reliability of systems, equipment and components Part 10: guidelines for reliability testing Section 3: qualification test procedure for steady state effectiveness
BS 5760 Sec. 10.3-1993 system Reliability of equipment and components Part 10: guidelines for reliability testing Section 3: qualification test procedure for steady state effectiveness

American Society for testing and materials, standard for reliability testing

ASTM f3147-2015 Standard Test Method for evaluating the connection reliability of surface mount device (SMD) on flexible circuits by rotating mandrel bending
ASTM f450-2013 Standard Test Method for heat resistance and reliability of plastic hose for vacuum cleaner
ASTM f450-2009 Standard Test Method for heat resistance and reliability of vacuum cleaner hose
ASTM f595-2001 Standard Test Method for vacuum cleaner hoses Durability and reliability (all plastic hose)
ASTM f595-2001 (2005) Standard Test Method for durability and reliability test of vacuum cleaner hose (all plastic hose)
ASTM f450-2001 Standard Test Method for vacuum cleaner hoses Heat resistance and reliability (reinforced plastic wire)
ASTM f450-2001 (2005) Standard Test Method for heat resistance and reliability of vacuum cleaner hose
ASTM f450-1996 Standard Test Method for vacuum cleaner hoses Heat resistance and reliability (reinforced plastic wire)
ASTM f595-1996 Standard Test Method for vacuum cleaner hoses Durability and reliability (all plastic hose)
ASTM d2512-1995 (2002) Standard Test Method for compatibility between materials and liquid oxygen (impact sensitive valve and reliability technology)
ASTM d2512-1995 (2002) e1 Standard Test Method for compatibility between materials and liquid oxygen (impact sensitive valve and reliability technology)
ASTM d2512-1995 (2008) Standard Test Method for compatibility of materials with liquid oxygen (impact sensitive valve and reliability technology)
ASTM d2512-1995 Standard Test Method for compatibility between materials and liquid oxygen (impact sensitive valve and reliability technology)
ASTM c537-1987 (2004) e1 Standard Test Method for glass coating reliability of steel reaction equipment by high pressure method
ASTM c537-1987 (2014) e1 Standard Test Method for glass coating reliability of steel reaction equipment by high pressure method
ASTM c537-1987 (2009) Standard Test Method for glass coating reliability of steel reaction equipment by high pressure method

National military standard - General Equipment Department, standard on reliability test

GJB 8108-2013 driving reliability test procedure for armored chassis engineering equipment
GJB 899a-2009 reliability qualification and acceptance test
GJB 6556.5-2008 type test method for military meteorological equipment Part 5: reliability and maintainability
GJB 1621.8a-2006 general technical requirements for technical reconnaissance equipment Part 8: reliability index and verification test method
Industry standard - automobile, standard on reliability test
QC / T 926-2013 reliability test method of power unit for light hybrid electric vehicle (ISG)
QC / T 702-2004 reliability test method of catalytic converter for motorcycle and moped
QC / T 525-1999 reliability test method for automobile engine
QC / T 76.11-1993 test method for mining dump truck service reliability test
QC / T 29037-1991 reliability driving test method for minivan

Industry standard - ship, standard on reliability test

CB 20076-2012 navigation product reliability acceptance test MTBF guarantee test
CB 1379-2005 fault classification for reliability test of ship products

American National Standards Institute, standard on reliability test

ANSI / ASTM f450-2013 test method for vacuum cleaner hose Durability and reliability (plastic)
ANSI / ASTM f595-2001 test method for durability and reliability of vacuum cleaner hose (all plastic hose)
ANSI / IEC / ASQ D1123-1997 reliability test Success rate of compliance test plan
ANSI / IEC / ASQ d1070-1997 compliance test procedure for steady state reliability
ANSI/RIA R15. 05.3-1992 industrial robots and automatic control systems Reliability acceptance test guide
German Society for standardization, standard on reliability test
DIN EN 61124-2013 reliability test Compliance tests for constant failure rate and constant failure strength (IEC 61124:2012) German version EN 61124-2012
Din spec 15707-2012 guide for reliability testing of digital cameras
DIN EN 62660-2-2012 secondary batteries for propulsion of electric road vehicles Part 2: reliability and abuse tests (IEC 62660-2:2010) German version EN 62660-2:2011
DIN EN 60749-30-2011 semiconductor devices Mechanical and climatic test methods Part 30: preparation of unsealed surface mounted equipment before reliability testing (IEC 60749-30:2005 + a1:2011) German version EN 60749-30-2005 + a1-2011
DIN EN 61747-5-3-2010 liquid crystal display devices Part 5-3: environmental, durability and mechanical test methods Glass strength and reliability (IEC 61747-5-3:2009, modified) German version EN 61747-5-3-2010
Din IEC 60605-6:2007 equipment reliability testing Part 6: Test for correctness and evaluation of constant failure rate or constant failure degree
DIN EN 62309-2005 reliability of products containing reusable parts Functional requirements and tests
DIN EN 61164-2004 reliability growth Statistical test and evaluation methods
Din IEC 60605-4:2002 equipment reliability test Part 4: statistical procedures for exponential distribution Point estimation, confidence interval, prediction interval, tolerance interval
DIN EN 62005-3-2002 reliability of optical interconnecting devices and passive components Part 3: relevant tests for evaluating failure modes and failure mechanisms of passive components (IEC 62005-3:2001)
DIN EN 62005-2-2002 reliability of fibre optic interconnecting devices and passive components Part 2: quantitative evaluation of reliability based on accelerated aging test Temperature and humidity steady-state
Din IEC 60605-3-4:1993 equipment reliability test Optimum test conditions Non fixed drive equipment Low analog
Din IEC 61123-1993 reliability test Success rate verification test scheme
Din IEC 60605-3-1:1988 electrical engineering; Equipment reliability test Part 3: Preferred test conditions Section 1: low analog indoor portable equipment:

International Electrotechnical Commission, standard on reliability test

IEC / PAS 62814-2012 reliability of software products containing reusable components Guidelines for function and testing
IEC 61124:2012 reliability test Compliance test of constant failure rate and constant failure strength
IEC / TR 62627-03-02:2011 photoconductive interconnections and passive components Part 03-02: reliability High power transmission test report of designated passive optical elements
IEC 61747-5-3 Corrigendum 1:2011 liquid crystal display devices Part 5-3: environmental, durability and mechanical test methods Glass strength and reliability Corrigendum 1
IEC 60749-30 edition 1.1:2011 mechanical and environmental testing of semiconductor devices Part 30: pretreatment before reliability test of equipment installed on unsealed surface
IEC 60749-30 AMD 1:2011 semiconductor devices Mechanical and climatic test methods Part 30: preparation of unsealed surface mount equipment prior to reliability testing
IEC / TR 62627-03-01:2011 fibre optic interconnecting equipment and passive components Part 03-01: reliability Design of acceptance test for fiber piston failure of temperature and humidity cycling device connector: boundary analysis
IEC 62660-2:2010 auxiliary lithium batteries for electric road vehicles Part 2: reliability and abuse test
IEC 61747-5-3:2009 liquid crystal display devices Part 5-3: environmental, durability and mechanical test methods Glass strength and reliability
IEC 60605-6:2007 equipment reliability testing Part 6: effectiveness and evaluation tests for constant failure rate and constant failure density
IEC 61124:2006 reliability tests Compliance test of constant failure rate and constant failure strength
IEC 60749-30:2005 semiconductor devices Mechanical and climatic test methods Part 30: pre commissioning of air tight surface mount devices prior to reliability testing
IEC 62309-2004 reliability of products containing reusable parts Functional requirements and tests
IEC 61164:2004 reliability growth Statistical test and evaluation methods
IEC 62005-7:2004 reliability of fibre optic interconnecting devices and passive optical elements Part 7: life stress simulation test
IEC 60605-4-2001 equipment reliability testing - Part 4: statistical procedures for exponential distribution, point estimation, confidence interval, prediction interval, tolerance interval
IEC 62005-3-2001 reliability of fibre optic interconnecting devices and passive components - Part 3: related tests for evaluating failure modes and failure mechanisms of passive components
IEC 62005-2-2001 reliability of fibre optic interconnecting devices and passive components Part 2: quantitative assessment of reliability based on accelerated aging test temperature and humidity: steady state
IEC 60300-3-5-2001 credibility management Part 3-5: Application guide reliability test conditions and principles of statistical test
IEC 60605-6 corr 1:2000 equipment reliability test Part 6: validity test of constant failure rate and constant failure density hypothesis
IEC / PAS 62182-2000 preset conditions before reliability test of non hermetic surface mounted devices
IEC 61124-1997 reliability test verification test under the assumption of constant failure rate and constant failure density
IEC 60605-6-1997 equipment reliability test Part 6: validity test of constant failure rate and constant failure density hypothesis
IEC 60605-3-6-1996 equipment reliability test Part 3: Recommended test conditions section 6: test cycle 6: rough simulation of outdoor mobile equipment
IEC 60605-3-5-1996 equipment reliability test Part 3: Recommended test conditions section 5: test cycle 5: rough simulation of ground mobile equipment
IEC 61164-1995 reliability growth - statistical test and estimation methods
IEC 60605-2-1994 equipment reliability test Part 2: Design of test cycle
IEC 60605-3-3-1992 equipment reliability test Part 3: Recommended test conditions section 3: test cycle 3: rough simulation of equipment in fixed use places with partial climate protection
IEC 60605-3-4-1992 equipment reliability test Part 3: Recommended test conditions section 4: test cycle 4: rough simulation of portable and non fixed equipment
IEC 61123-1991 reliability test success rate verification test scheme
IEC 60605-4 AMD 1:1989 equipment reliability test Part 4: procedures for determining point estimation and confidence limit of equipment reliability determination test 1st modification
IEC 60605-3-2-1986 equipment reliability test Part 3: Recommended test conditions section 2: fine simulation of equipment used in places with climate protection
IEC 60605-3-1-1986 equipment reliability test Part 3: Recommended test conditions section 1: rough simulation of indoor portable equipment
IEC 60605-6:1986 equipment reliability tests Part 6: effectiveness test under constant failure precondition
IEC 60605-4:1986 equipment reliability tests Part 4: procedures for determining point estimation and confidence limit of equipment reliability determination test
IEC 60605-1 AMD 1-1982 equipment reliability testing Part 1: General requirements Amendment 1
IEC 60605-1-1978 equipment reliability testing Part 1: General requirements
IEC 60605-7:1978 equipment reliability tests Part 7: Verification Test Method of failure rate and mean time between failures under constant failure precondition

French Standardization Association, standard on reliability test

NF c20-304-2012 reliability test Compliance test of constant failure rate and constant failure strength
NF c58-985-2-2012 lithium ion battery for electric road vehicle drive Part 2: reliability and abuse tests
NF c96-022-30 / a1-2011 semiconductor equipment Mechanical and climatic test methods Part 30: pretreatment of unsealed surface mounted devices before reliability test
NF c93-547-5-3-2010 liquid crystal display device Part 5-3: environmental, durability and mechanical test methods Glass strength and reliability
NF c20-304-2006 reliability test Compliance test of constant failure rate and constant failure strength
NF c96-022-30-2005 semiconductor devices Mechanical and climatic test methods Part 30: pre commissioning of air tight surface mount devices prior to reliability testing
NF c20-345-2005 reliability of products containing reusable parts Functional requirements and tests
NF x60-530-2004 reliability growth Statistical test and evaluation methods
NF c93-913-3-2001 reliability of optical fiber interconnection devices and passive components Part 3: relevant tests for passive component failure mode and failure mechanism evaluation
NF c93-913-2-2001 reliability of optical fiber interconnection devices and passive components Part 2: quantitative evaluation of reliability based on accelerated aging test Temperature, humidity and steady state
NF g90-053-1975 household sewing machine Reliability test of pin length adjuster
NF g90-052-1975 household sewing machine Reliability test of needle and thread tensioner

Industry standard - post and telecommunications, standard on reliability test

YD / T 2342-2011 reliability test method of optoelectronic devices for communication
YD / T 2152-2010 reliability requirements and test methods for optical fiber movable connectors
YD / T 282-2000 general test method for reliability of communication equipment
YD / T 642-1993 reliability index and test method of carrier communication equipment
YD / T 612-1993 reliability index and test method of fax communication equipment

European Committee for Electrotechnical Standardization, standard on reliability test

EN 62660-2-2011 lithium ion batteries for electric road vehicles Part 2: reliability and abuse test
EN 62059-31-1:2008 current measuring equipment Reliability Part 31-1: accelerated reliability test Temperature rise and humidity test
EN 60749-30:2005 semiconductor devices Mechanical and climatic test methods IEC 60749-30:2005 Part 30: Precommissioning of non hermetic surface mount devices prior to reliability testing
EN 61164-2004 reliability growth Statistical test and estimation methods IEC 61164:2004
EN 62309-2004 reliability of products containing reusable parts Functional requirements and tests IEC 62309:2004
EN 62005-3-2001 reliability of optical fiber interconnecting devices and passive components IEC 62005-3:2001 Part 3: tests related to the evaluation of failure modes and failure mechanisms of passive components
EN 62005-2-2001 reliability of optical interconnecting devices and passive components Part 2: quantitative evaluation of reliability based on accelerated aging test Temperature, humidity and steady state IEC 62005-2:2001

Industry standard - Railway, standard on reliability test

TB / T 3219-2010 reliability test rules for relays and contactors of rolling stock

Japan Industrial Standards survey Association, standards on reliability test

JIS c2162-2010 test method for long term reliability of gate insulators for SiC devices at high temperature
JIS c5750-4-1-2008 reliability management Part 4-1: Application guide Reliability of products containing recycled parts Functional and test requirements
JIS c5750-3-5-2006 credibility management Part 3-5: Application guide Reliability test conditions and principles of statistical test

Korean standard, standard on reliability test

KS B 6968-2008 reliability test method of vacuum valve Part 3: pressure regulating valves
KS B 6967-2008 reliability test method for vacuum valves Part 2: gate valves
KS C 7112-2007 organic light emitting diode (OLED) display Environmental reliability test method
KS C IEC 61747-5-3:2007 liquid crystal display devices Part 5-3: environmental, durability and mechanical test methods Glass strength and reliability
KS a IEC 61124:2005 reliability testing Compliance test of constant failure rate and constant failure intensity
KS C IEC PAS 62182-2003 preconditioning of equipment mounted on unsealed surfaces prior to reliability testing
KS C IEC 62005-2:2002 reliability of fibre optic interconnecting devices and passive components - Part 2: quantitative evaluation based on accelerated aging test under certain temperature and humidity conditions
KS C IEC 62005-3-2002 reliability of fibre optic interconnecting devices and passive components - Part 3: related tests for evaluating failure modes and failure mechanisms of passive components
KS a IEC 60605-3-6:2002 equipment reliability testing Chapter 3: Standard Test conditions Section 6: test cycle 6: outdoor mobile equipment Low level simulation test device
KS a IEC 60605-3-5:2002 equipment reliability testing Chapter 3: Standard Test conditions Section 5: test cycle 5: ground mobile equipment Low level simulation test device
KS a IEC 60605-3-4:2002 equipment reliability testing Chapter 3: Standard Test conditions Section 4: test cycle 4: portable and non fixed equipment Low level simulation test device
KS a IEC 60605-3-3:2002 equipment reliability testing Chapter 3: Standard Test conditions Section 3: test cycle 3: fixed equipment used in some climate protection occasions Low level simulation test device
KS a IEC 60605-3-2:2002 equipment reliability testing Chapter 3: Standard Test conditions Fixed equipment for site protection against climate change Advanced simulation test device
KS a IEC 60605-3-1:2002 equipment reliability testing Chapter 3: Standard Test conditions Indoor portable equipment Low level simulation test device

National military standard - National Defense Science, technology and Industry Commission, standard on reliability test

GJB 6399-2008 reliability requirements and test methods of hydraulic pumps for missiles and launch vehicles
GJB 6462-2008 reliability appraisal and acceptance test of aerial gun
GJB 6458.30-2008 rocket launcher test methods Part 30: reliability test
GJB 5496.21-2005 test methods for aerial bombs Part 21: safety and reliability test parachute opening reliability
GJB 3196.50a-2005 bullet test method Part 50: action reliability test of ammunition to gun mechanism
GJB 5489.13-2005 aviation machine gun test methods Part 13: reliability
GJB 5495.9-2005 grenade launcher Test Method Part 9: reliability test
GJB 5496.22-2005 test methods for aerial bombs - Part 22: safety and reliability tests - unpacking reliability of aerial submunition bombs
GJB 5496.20-2005 test methods for aerial bombs Part 20: safety and reliability test hanging and dropping safety

Industry standard - Petroleum, standard on reliability test

SY / T 5099-2007 environmental test and reliability requirements for petroleum logging instruments
SY / T 6541-2003 environmental test and reliability requirements of geophysical instruments

Industry standard - Electronics, standard on reliability test

SJ / T 11325-2006 reliability test method for digital TV receiving and display equipment
SJ / T 10654-1995 General requirements for reliability test of short wave single sideband communication equipment
SJ 20496-1995 reliability requirements and test methods for military communication electroacoustic devices
SJ / T 10601-1994 reliability requirements and test methods of loudspeaker
SJ / T 10386-1993 reliability index verification test method for special equipment in electronic industry
SJ / T 10373-1993 reliability test method for TV transmitter and differential
SJ 20375-1993 general specification for military electronic test equipment Reliability test requirements and methods
SJ / T 10247.8-1992 audio power load control system Reliability test method
SJ / T 10292-1991 high temperature load reliability requirements and test methods for electronic tuners of television broadcasting receivers
SJ 2940-1988 reliability test method for radio equipment of satellite communication earth station
SJ 2901-1988 fax machine reliability test method
SJ 2847-1988 equipment reliability test method for terrestrial radio relay system (exponential distribution)
SJ 2810-1987 reliability test method for carrier communication equipment
SJ 2586-1985 reliability test method for marine navigation radar
SJ 2584-1985 reliability qualification test and acceptance test of radar equipment
SJ 2596-1985 reliability qualification test and acceptance test of black and white TV receiver
SJ / Z 9110-1987 equipment reliability test Part 4: procedure for determining point estimation and confidence limit in equipment reliability determination test

(American) solid state Technology Association, subordinate to EIA, standard on reliability test

JEDEC jesd22a113e-2006 pre adjustment of equipment installed on unsealed surface before reliability test

American Telecommunications Industry Association, standard for reliability testing (5])

TIA sp 3-0169-2004 reliability of optical fiber interconnection devices and passive optical elements Passive component failure mode and failure mechanism evaluation test

Industry standard - Navy, standard for reliability testing

HJB 282-2003 reliability test method for naval ship radar

Industry standard - Aerospace, standard on reliability test

QJ 3127-2000 guide for reliability growth test of aerospace products
QJ 2631-1994 missile system level comprehensive environmental reliability test method
QJ 2653-1994 reliability verification test method for ground equipment of ground to ground strategic missile
QJ 2398-1992 reliability specification for static test system of solid rocket motor
QJ 1353-1988 reliability requirements and test methods for Aerospace Hydraulic Pumps
QJ 1589-1989 reliability growth test
QJ 1512-1988 reliability verification test method for silicon low power NPN triode
QJ 932-1985 reliability test method for aerospace low frequency electrical connectors

Industry standard - urban construction, standard on reliability test

CJ / T 91-1999 reliability test method for vacuum suction vehicle

Industry standard - aviation, standard on reliability test

HB 7592-1998 test method for reliability growth of aircraft non electronic systems
Hb / Z 214.3-1992 reliability growth of aviation products test
HB 6158-1988 reliability test fault classification

American electronic circuit and electronic interconnection Industry Association, standard on reliability test

IPC TM-650 5.5.1.12-1998 ipc-a-39 - small hole reliability test mode

American Society of electrical and electronics engineers, standard for reliability testing

IEEE 1366-1998 guide for power distribution reliability index testing

Industry standard - construction industry, standard on reliability test